User Reviews

Average User Rating

3 out of 5 (10 reviews)

Sign in to write a review

• 5 out of 5

  November 2, 2012

  Phil C

  Windsor Locks, CT

  Any way of changing the default?

  Hi All, I agree whole-heartedly that the default setting to stay off after the wall switch has been turned off over an extended period of time is quite frustrating. Is there a way to change that setting? Can a new receiver and remote be purchased? I love the fan but I want to control the light from the wall every time and use the remote while in bed. Appreciate any suggestions (sorry it's months after the last post but I was estatic to find this forum).

• 2 out of 5

  June 4, 2012

  MEJ

  Arlington, VA

  Agree this doesn't work logically w/ wall switch

  "JM" reports that this remote/receiver don't work logically with wall switch. Turning off the power at the wall switch causes the remote/receiver to default to "off" when switch is flipped back on. When you expect to use a wall switch to turn on a ceiling light, this is a big problem. At this point, I wish I hadn't even connected up the receivers and could just use the pull chains, but it's too late for that. I have another fan (different manuf.) where the remote/receiver remember the most recent settings.

• 2 out of 5

  January 28, 2012

  J M

  Pittsburgh, PA

  Doesn't work logically with a wall switch

  If you plan on using this remote with a wall switch, when the wall switch is turned off, and then back on, the remote defaults back to 'off' position, therefore, you will need to hunt down the remote in the dark to turn the lights back on, as opposed to the remote maintaining the settings at the time the wall switch was turned off. My other, more expensive, remotes DO remember the last setting when the wall switch is turned off making the wall switch useful. In summary, this unit is fine if you plan on NOT using a wall switch with it.

• 5 out of 5

  January 25, 2012

  cary

  troubleshootingok

• 5 out of 5

  December 11, 2011

  Basic on off controlsharon

  MERRITT ISLAND

  BASIC ON/OFF CONTROL

  WORKS GREAT I HAVE HAD IT SEVERAL YEARS THROUGH SEVERAL GRANDKIDDO'S ABUSE AND IT STILL WORKS LOVE IT!

• 5 out of 5

  December 9, 2011

  Adrian

  Minneapolis, MN

  Good Simple Remote

  It's a good remote. I've use one before. I'd recommend changing the code right away because my neighbor had the same remote. I was actually looking for the wiring instructions on here, I guess they don't put those PDF's on-line though.

• 3 out of 5

  September 25, 2011

  Frank Mc

  OAKVILLE

  Remote required for all operation.

  The remote that came with my Cedonia Ceiling Fan is very basic (Fan and Light OFF/ON). If the wall switch is turned off and then back on the Fan and Light settings return to OFF and you need the remote control to get both the Fan or Light to come back on. Being that the remote doesn't come with a wall mount, it often gets lost thus making it impossible to use the fan.

• 1 out of 5

  August 21, 2011

  Doug

  Wailuku, HI

  Great in concept, but poor execution

  Great idea, great price, but has problems. First big one: the default position of the switch is off. Thus if you turn the light switch off and come back, you have to find the remote to get the light or fan to come back on. The default should have been on so that the temporary misplacement of the remote didn't leave the whole thing useless. Second and perhaps dangerous: the wires for fan and light don't match the remote: i.e. the fan switch powers the light and vice versa (and no, I double checked the wiring - even the instruction sheet shows the switches in the reverse position). This may be dangerous if the relays inside, which are rated for 300W (light) and 1.0 amp (fan) are somehow reversed as we

• 2 out of 5

  August 10, 2011

  BC

  San Jose, Ca

  Turns on randomly

  Purchase 2 for my kids rooms, 2 months apart. Problems: 1. One unit came with a battery. 2nd didn't. Had to make a trip back to HW store to get battery. 2. Both units randomly turn on in the middle of the night. First thought it was just because they were rolling over on the remote. Turns out that even when I took the battery out of the remote, lights continued to turn on. 3. Does not have bracket / wall hanger for the remote.

• 5 out of 5

  July 28, 2010

  warren f

  123 palmer ave colon mi 49040

  remote switch

  just purchased hunter remote control and i have no battery cover. please let me know how to get this item Thanks Warren Frazier

Write a Review

Display Name* First Name* Last Name City, State* Email*

Rating* Comment Title* Comments*

*Required